AHD Speed Dome Camera Introduction Manual
15
▌▌
Pattern
Pattern Function is that a camera memorizes the path (mostly curve path) by joystick
of controller for assigned time and revives the path exactly as it memorized.
8 Patterns are available and Maximum 150~180S or 500 communication commands
can be stored in a pattern.
Pattern Setup <DOME CAMERA SETUP>
→
<PATTERN SETUP>
→
<EDIT PATTERN>
□
Pattern editing screen is displayed as below.
□
Movement by Joystick and preset movement can be memorized in a pattern.
□
The recording time will be shown on the right-down corner
Pattern Scan also can be set as preset, swing and group included. ex. if user needs pattern to run
preset 1, swing 8 and group 5 in Pattern Scan 1, then the command will be as following,
call+1+enter
→
call+148+enter
→
call+155+enter and save. To execute the pattern 1 scan
(call+131+entern) the scanning will move as setting.
Run Pattern
Ex) Run Pattern 1: <Call>[131]<Enter>
Ex) Run Pattern 2: <Call>[132]<Enter>
Delete Pattern Use OSD menu to delete Pattern
<DOME CAMERA SETUP>
→
<PATTERN SETUP>
→
<CLR PATTERN>
(PATTERN SETUP)
PATTERN NO.: 001~008
STATE : UNDEFINED / DEFINED
CLR PATTERN : CANCEL / OK
(EDIT PATTERN)