Wizard ON-AP410A, Instruction Manual, Page: 27 / 31

AHD Speed Dome Camera Introduction Manual
26
▌▌
Group Setup
▌▌
Edit Group
<Dome Camera Setup>
→
<Group Setup>
Croup Number [1~8]
Selects Group number to edit.
If a selected Group number is not defined,
"UNDEFINED" will be displayed under
selected Group number.
Clear Group [CANCEL/OK]
Deletes data in current Group
Edit Group Start editing Group.
Run Group Run current Group
<Dome Camera Setup>
→
<Group Setup>
→
<Edit Group>
1. Press OPEN key to start Tour setup.
2. Note that MAX. 16 “Presets” are allowed in a Tour. Move
cursor up/down and press OPEN key to set up.
3. Set up Action, Dwell time and Speed is optional. Time
value from displayed in reverse. Move cursor Left/Right to
select items and 3 sec To 240 sec. Speed value from 50 to
300. Move cursor Left/Right to select items and move
cursor Up/Down to change each value.
(GROUP SETUP)
GROUP NO. : 001~008
STATE : UNDEFINED / DEFINED
CLEAR GROUP: CANCEL / OK
<EDIT GROUP>
RUN GROUP
BACK
EXIT
(EDIT GROUP)
ID P-NO . SPEED TIME
1 000 240 005S
2 000 240 005S
3 000 240 005S
4 000 240 005S
5 000 240 005S
6 000 240 005S
7 000 240 005S
8 000 240 005S
9 000 240 005S
10 000 240 005S
11 000 240 005S
12 000 240 005S
13 000 240 005S
14 000 240 005S
15 000 240 005S
16 000 240 005S
BACK
EXIT