AHD Speed Dome Camera Introduction Manual
25
▌▌
Pattern Setup
▌▌
Edit Pattern
<DOME CAMERA SETUP>
→
<PATTERN SETUP>
Pattern Number [1~8]
Selects Pattern number to edit.
If a selected pattern number is not defined,
"UNDEFINED" will be displayed under
selected pattern number.
Clear Pattern [CANCEL/OK]
Deletes data in current pattern
Edit Pattern [OK/CANCEL]
OK: Edit the pattern function
Cancel: Don't execute the pattern function.
Edit Pattern
Starts editing pattern. By using Joystick, move
to start position with appropriate zoom. To start
pattern recording, press OPEN key then select
OK via joystick. To exit this menu, press
CLOSE key. Move camera with joystick of
controller or run preset function to memorize the
path (mostly curve path) in a selected pattern.
Maximum 500 commands can be stored in a
pattern. Please refer to the p.15 Setup pattern.
Run Pattern Run current Pattern
(
PRESET SETUP)
PRESET NO.: 001~255
STATE : UNDEFINED /
DEFINED
CLEAR PRSEET: CANCEL
CLEAR ALL :CANCEL
(EDIT SCENE)
BACK
(EDIT PATTERN)
REMAIN : 100/100
PTZ TO SELECT
OPEN SAVE CLOSE EXI
T