AHD Speed Dome Camera Introduction Manual
22
▌▌
Motion Setup
<DOME CAMERA SETUP>
→
<MOTION SETUP>
Setup the general functions of Pan/Tilt motions.
MOTION LOCKk [OPEN/CLOSE]
Group. It is possible only to run those functions.
To set up and delete those functions, enter into
OSD menu.
PWR UP ACT [NOTHING/GROUP/PATTERN/SWING/
A SCAN]
Refer to "Other Functions" section.
Auto Flip
[OPEN/CLOSE]
Refer to "Other Functions" section.
Direction
[INVERSE/NORMAL]
If you set this to 'Inverse', the view in the
screen is moving same direction with jog
tilting. If 'Normal' is selected, the view in
the screen is moving reversely.
DOME Max Speed
[1º /sec
∼
360º /sec]
Sets maximum jog speed. Jog speed is
inversely proportional to zoom magnification.
As zoom magnification goes up, pan/tilt speed
goes down
■
Parking Action Setup
<DOME CAMERA SETUP>
→
<MOTION SETUP>
→
<PARKING ACTION SETUP>
If Park Enable is set to ON, camera runs assigned
function automatically if there is no PTZ command
during assigned ''Wait Time''.
Wait Time [003~240S]
The time is displayed with "XXX S"
format
and you can change this joystick or
keyboard..
Park Action
(MOTION SETUP)
MOTION LOCK : OPEN / CLOSE
PWR UP ACT : NOTHING
AUTO FLIP :OPEN / CLOSE
DIRECTION :NORMAL /INVERSE
DOME MAX SPEED :360
(TILT ANGLE SETUP)
(PARKING ACTION SET)
BACK
EXIT
(TILT ANGLE SETUP)
TILT ANGLE : -10~180
BACK
EXIT
(PARKING ACTION SET)
WAIT TIME : 003S~240S
PARK ACT : NOTHING
BACK
EXIT
