4.
Loosen the swivel nut per hand.
5.
Turn the air cap to the desired position.
6.
Tighten the swivel nut securely.
Flat stream direction adjustment
Turn the air cap depending on the desired direction
(the spray tip rotates with it)
Spray pattern
Air cap horizontal
Air cap vertical
Adjusting the atomizing air
The atomizing air flows from the air cap as soon as pressure is applied to the
trigger. Because it is started before the material flow, the material is atomized
consistently from the first drop. And because releasing the trigger stops the
material flow first, the atomizing air will carry the last drop of material into the
spray stream.
Pos. Description
1
Locking tappet
2
Needle
Pos. Description
3
Needle carrier
4
Needle back part
Fig. 5.3
1
2
3
4
1.
Interrupt the air supply to the entire unit.
2.
Trigger the spray gun to release pressure.
3.
Lock the spray gun (safety lever horizontal).
24
Translation of the original operation manual
SPAC_Optima2100_1302_en • 0550012 • jw
Operation
Summary of Contents for OPTIMA 2100
Page 2: ......
