3.3 Technical data
3.3.1 Connected loads
Maximum permitted air pressure
8 bar
Recommended operating pressure
Operating pressure depends on viscosity, nozzle size and
kind of spray system (Airless - Air Combi)
1,5 - 3 bar
Maximum permitted material temperature by operation
without gloves
40 °C
Maximum permitted material temperature by operation with
gloves
60 °C
Maximum permitted material pressure
250 bar
For short positive pressures of 10 - 12 bar ( 143 – 170 psi ) at the air supply
and higher pump pressures (above 250 bar – 3.556 psi material pressure)
there is no danger of damage to the high pressure spray gun.
Positive pressure in the material area are compensated by automatic release
of the paint needle.
Caution! This releases spraying material!
3.3.2 Material consumption and output values
Material consumption values: vary depending on nozzle bore and pump
pressure
Material output values: Measurement based on the following values:
Operating pressure
100 bar
Nozzle size
0,23 mm
Material viscosity
45 sec. DIN 4 mm/20 °C
Material output
approx. 0,26 l/min
Translation of the original operation manual
17
SPAC_Optima2100_1302_en • 0550012 • jw
Description of equipment
Summary of Contents for OPTIMA 2100
Page 2: ......
