33
WT-9002 IP65 User Manual
WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Warning: User can use their preset password to reset the unit and it must be noted
down or remembered. In case if the password is forgotten or cannot be accessed,
please consult our technical department.
To manually reset the unit, you can press and hold on the “Call” button and turn on the
unit for 10 seconds. The unit will displays Wait… and then OK, the unit is reset.
To set the output relays to supply DC voltage (Based on the power adapter used) when
activated, please adjust the jumper according to the below diagram.
To set the output relays to dry contact when activated, please adjust the jumper
according to the below diagram
4.33 SETTING THE OUTPUT RELAYS FOR VOLTAGE OUTPUT OR DRY CONTACT
