9
WT-9002 IP65 User Manual
WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
IP 65 Enclosure
The GSM unit is design fully protected against dust tight and protected against water
jets from all directions. It is suitable to use at outdoor and complied to the
International IP rating.
Note: It is essential that you read the instructions fully prior to installing and
programming the unit
Note:
Installing the SIM Card. Please be sure the initial 4 digit PIN code of SIM
card is disabled. This can be done by placing it in an unlocked Mobile phone and first
checking if the SIM requested any PIN code. If this is the case the PIN code can be
disabled using the security settings on the phone.
Procedure
1.
Slide back the SIM door and lift it up
2.
Slide the SIM card into the SIM door making sure that the clipped corner of the SIM
card lines up with the clipped corner of the SIM holder
3.
Close the SIM door
4.
Slide the SIM door to lock the SIM card in place
Caution: Make sure the voice mail feature of the all the administrators SIM Card are
disabled
The unit can operate with voltage between 12V to 24V AC or DC. Wait 15 seconds for
the unit to set up after connecting power. The GSM Status LED will start to flash when
the system is ready.
3.
INSTALLATION INSTRUCTION
ii)
POWER
i)
INSTALLING THE SIM CARD
