26
WT-9002 IP65 User Manual
WT-9002 IP65 – USER MANUAL – Rev.2.0 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Press *6# (A short beep ~ success)
Continue press 2# for relay 2 (A short beep ~ success)
Then input value 00120# (A short beep ~ success)
Relay 2 will now latch for 120 seconds and after 120 seconds it will switch off and sends
a message back to the administrator informed that Relay 2 has closed.
Returned Message:
RLY2-OFF
When relay 1 latches, the unit will display the counter on the LCD.
00008
RLY WT-9002
When both relays latch…
00008
00118
RLY WT-9002
Note: Anytime if you want to cancel while it latches, you can always call to the unit and
set the latching time back to 00000 and it will stops the relay.
If at any time you hear 3 beeps the change has been unsuccessful and you will
need to recall the unit and try again.
It is possible to latch both relays for up to the maximum of 65,535 seconds for a certain
time. To change both relay latching times by sending the following SMS.
Example:
Temporary latch Relay 1 for 60 seconds
Temporary latch Relay 2 for 180 seconds
4.19 TEMPORARY LATCHES THE RELAYS VIA SMS
