4.3.2
Check of gripping distance “s”
Tolerated brake length has to be defined by the
system distributor. Check System operating manu-
al for brake distance values. If no tolerated brake
distances are defined by the system distributor, the
tables from Annex A can be used as a reference.
Read the minimum and maximum tolerated brake
distance from the belonging table blased on the
weight situation of the lift.
•
If the braking distance “s“ is within the toler-
ated values, the safety gear is set correctly!
•
If the gripping distance “s“ is not in the toler-
ated distance, please check:
• if the guide rails and the brake-lining are
cleaned and nonfat
• if the mass of the cabin accords with the
order
• the right function of the synchronization
If the failure could get solved, you have to repeat
the test after the correction work.
•
If the braking distance “s“ is out of the tolerat
ed values again, the safety gear must be
replaced (please contact WITTUR)
Progressive Type Safety Gear
WSGB04, WSGB10
Operating instructions
Blatt/
sheet
D7AMMGB.30
Datum/
date
11.04.2003
Stand/
version H-07.08.2020
Geprüft/
approved WAT/KKR
Änderungen vorbehalten!
Subject to change without notice!
H
