(
4
) Install the synchronization rod (G) to the axles
(A) - secure with pin (H). Adjust the length by
means of the adjustment nuts and lock with
lock nuts (I).
(
5
) Mount the fixing bracket (J) to the crossbeam
profile and hook in the synchronization
retaining spring (K)
(
6
) Fix the governor rope housing (M) to the safe-
ty gear lever - install the governor rope (use
delivered rope clips).
(
7
) Fit the safety gear contact (L) to the beam
profile
(
8
) Check the safety gear - synchronization func-
tion. If both safety gears do not grip at the
same time (refer also to chapter 3.1), adjust
the length of the synchronization rod by use
of the adjustment nut (refer also to chapter
3.1 - 3.5).
Progressive Type Safety Gear
WSGB04, WSGB10
Operating instructions
Blatt/
sheet
D7AMMGB.22
Datum/
date
11.04.2003
Stand/
version D-16.02.2010
Geprüft/
approved WAT/MZE
Änderungen vorbehalten!
Subject to change without notice!
G
H
(
4
)
(
5
)
(
7
)
G
I
J
L
M
K
Switch cam
Rope clip
Adjustment nut
(
6
)
