The overspeed governor OL35E-NA identification
indicators are located on the governor safety
cover.
These consist of a metal name plate and a identi-
fication sticker which gives following data
(meeting ASME A17.1):
•
Mechanical tripping speed
•
Size, material and construction of the gover-
nor rope
•
Governor pull through tension force
•
Type term of overspeed governor
•
Nominal speed
•
Safety circuit switch off speed
•
Serial number
•
Elevator number
The overspeed governor is pre-adjusted
and calibrated at the factory. No re-adjust-
ment is allowed.
2
Name plate, designation, identification
Date of manufacture
Type term
Type term
Serial
number
Nominal speed NS = (m/s)
Rope diameter
Tripping speed TS = (m/s)
Tripping speed TS
Data of governor rope
Pull through tension force
Safety circuit switch off
speed (m/s)
Order number - Elevator number
(refer to delivery or order sheet)
Änderungen vorbehalten!
Subject to change without notice!
Overspeed Governor
OL35E-NA
Operating instructions
Blatt/
sheet PM.7.002374.006
Datum/
date
08.04.2011
Stand/
version B-21.10.2013
Geprüft/
approved WAT/MZE
min. brake force (N)