5.3.4
Check the condition (wearing) of the
wheel rope groove
1. Check the groove type
2. Measure the groove wear (T) in the center of
the rope on the top of a strand
3. Check the wearing out
Tmax for d=6mm ... 4,5mm
d=6,5mm ... 2,5mm
After getting the maximum allowed wearing out
(=Tmax),
the governor must be replaced!
Keep the governor clean, especially the flyweight
springs, because they are mainly responsible for
proper operation and correct tripping
5.3.5
Check the condition of the wheel
bearing
Check it by listening to the running
noise.
Änderungen vorbehalten!
Subject to change without notice!
Overspeed Governor
OL35E-NA
Operating instructions
Blatt/
sheet PM.7.002374.021
Datum/
date
08.04.2011
Stand/
version C-20.09.2017
Geprüft/
approved WAT/MZE
the pulley MUST not
move in axial direction!
