TwinLock 7220
Manual
50
Version 1.08A
6.9. Opening duress (program forced sequence)
Menu Navigation:
Select the menu item ‘
opening duress
(see menu plan 4.2/ see above)
Enter system code
Evaluate the entry
Display of the current setting
and definition of the new condition
Action completed
Automatic return after 3 seconds
Forced Sequence
Programming the function 'Opening duress' determines the unlocking or locking
sequence.
The system will only then be in an unlocked state when all locks are open. It will be in
a locked state, when all locks are closed.
Opening sequence:
lock 1, lock 2 … lock n (system unblocked)
Locking sequence:
Lock n, … lock 2, lock 1 (system locked)
The programming of this function can only be performed by the owner of the system
code and is saved in the event log!
Factory setting:
No opening duress (no forced sequence) = No.
Lock
opening duress
System code
Code:********
System code
Please wait
opening duress
*= Yes *=No
opening duress
Saved
*** TwinLock ***
21.05.09 12:00
*** TwinLock ***
Configuration
Configuration
Lock
Lock
Opening duress
