TwinLock 7220
Version 1.08A
77
License chip card
To active the PC software you will need a license chip card, which is a part of the
scope of delivery of the configuration set. After TwinComm is started, this card must
be inserted into the chip card reader.
After the license chip card has been read, the according locking system can be
selected. (->
TwinLock
)
To read the data from the chip card “
TwinCard configuration
“, it must be inserted
into the chip card reader. Then push the button
“
Read chip card
".
To save the data to the chip card
“
TwinCard configuration
“, it must be
inserted into the chip card reader.
Then push the button “
Write chip card
".
