TwinLock 7220
Manual
84
Version 1.08A
Automatic locking
Automatic locking with
a door switch
bolt system or door switch.
For this action, the function
TwinXT
active
must be
programmed, or
TwinAlarm
active
.
Manual locking after
bolt system query
Before the locking procedure, the position of the
bolt system is queried using a switch. For this
action, the functions
TwinXT
active
or
TwinAlarm
active
must be programmed.
TwinAlarm active
Activate TwinAlarm. This function is required for the
arming/disarming of a BAS.
Silent alarm
Activate silent alarm, time delay
01-99 minutes
BAS level
BAS input and output level setting
Factory setting at the lock: “low active”
Notes:
The levels must only be reprogrammed in
special circumstances. The factory setting
should be applicable to all conventional
burglary alarm systems.
Arming with code card
From version T08 (control unit), 2 different code
cards can be inserted:
Code card
Code card II
Factory setting at the lock: Code card
It is not possible to use both card types in one
system.
BAS user 1
Allocating a BAS user number, which is used
BAS user 2
to not open the lock after it is entered, the code is
queried and teh BAS is disarmed. Two codes may
be defined!
System line:
The system line is displayed in the 1st. line of the
main menu, on the display of the control unit. It can
be changed and set as required anytime.
