TwinLock 7220
Version 1.08A
71
6.27. Activate Parallel Code
Menu Navigation:
Enter system code
Evaluate the entry
Display of the current setting
and selection of the new condition
Save setting
Action completed
Notes:
Only possible, if there are 2 or 3 locks in the system
Unlocking procedure:
During the unlocking procedure, the status of lock 01 is queried first. If
lock 01 is closed, an unlocking code must be entered without selecting
lock 01 beforehand. If lock 01 is open, the condition of lock 02 is
automatically queried. When lock 02 is closed, an unlocking code must
be entered without selecting lock 02 beforehand. Lock 02 unlocks.
Programming of the codes
In all locks, the same codes must be programmed for the according users, e.g.
User 08:
Code: Lock 1: 08080808
Code: Lock 2: 08080808
or
Code: Lock 3: 08080808
Notes:
1. For this functionality, the explicit four-eye code (code combination) is deactivated.
2. This function is only approved for 2 or 3 lock operation.
*** TwinLock ***
21.05.09 12:00
*** TwinLock ***
Configuration
Configuration
System
System
Parallel code
System code
Code:********
System code
Please wait
Parallel code
*= Yes *=No
Parllel code
Saved
System
Parallel code
