Wittenstein Simco SIM2050D, Operating Manual

Page: 25 / 35

Operating Manual simco
®
drive SIM2050
Revision: 04 4022-D048047 en-23
d
eu
ts
c
h
e
ngl
is
h
it
a
lia
no
d
eu
ts
c
h
e
ngl
is
h
fr
a
n
ç
a
is
it
a
lia
no
e
s
p
a
ño
l
日本語
6.9 Motor circuit protection
Circuit breaker hardware to protect the motor is not required as the motor is protected from
overloading by an I²t function in the software and by an optional motor temperature sensor.
7 Startup and operation
7.1 Safety instructions
For secure application of the drive amplifier, the following regulations must be observed:
−
Connection and operating instructions
−
Local regulations
−
EC regulations and the EC Machinery Directive
•
The housing temperature on the drive amplifier can reach 80 °C
during operation.
•
Wait until the housing temperature has cooled down to 40 °C
before touching the drive amplifier.
•
Before startup, the machine manufacturer must prepare a risk
assessment for the machine and take appropriate measures so
that unforeseen movements cannot lead to personal injury or
property damage.
•
Only technicians with extensive experience with electrical and
electronic systems and drive technology may start up the drive
amplifier.
7.2 Startup software
For parameterization and startup of the drive, the startup software motion gui is available as
well as an interactive, html-based help.
The startup software
motion gui is used to change and save the operating parameters of the
drive amplifier. The connected drive amplifiers can be put into operation with the help of
software.
In the html-based help, all parameters and the function of the drive amplifier are described.
•
Incorrect parameterization can cause uncontrolled movements.
For this reason, never change parameters whose meaning you
do not completely understand.