Description of the gearbox
V.. / NV.. / CV..
en-8
2022-D059517
Revision: 05
3
Description of the gearbox
The gearbox is a single- or multi-stage low-backlash servo worm gearbox.
The gearbox must only be operated in mounting position as specified in the order.
Various types of motors can be accommodated using an adapter plate and, where necessary, a
bushing.
The gearbox is equipped with an integrated linear length compensation to compensate for the
expansion of the motor shaft when heated up.
3.1
Overview of gearbox components
3.1.1 Version with through-holes
3.1.2 Version with threaded bores
Gearbox components
E
Gear housing
Q
Output shaft / Output flange
Q
5
For an indexing pin for mechanically zeroing the
gearbox/the application.
B
Adapter plate
Tbl-1: Overview of gearbox components VT
+
/ VS
+
/ NVH / CVS
Gearbox components
M
Through-holes
(see Chapter 5.3.1 "Mounting with through-holes")
Tbl-2: Version with through-holes
Gearbox components
E
3
Housing surface (Gear housing)
M
Threaded holes
(see Chapter 5.3.3 "Mounting with threaded bores")
Tbl-3: Version with threaded bores
VT
+
VS
+
NVH
CVS
B
Q
Q
5
E
Q
B
Q
E
B
B
M
M
M
M
E
3
E
3
M
