Witschi ProofMaster, Operating Manual

Page: 41 / 96

Use
17.10.2019 41 / 96
b
1
2
b) Press the desired program in the list.
ð
The program is selected and its name 1 and parameters 2
are displayed.
5.2.7 Starting the test
a) Select the program.
ð
See Selecting the program [
}
Page 40] and/or Programming a
quick test [
}
Page 38] .
CAUTION
Observe all safety regulations for the test pressures in
order to avoid accidents and damage to the watch or the
ProofMaster!
See Safety regulations [
}
Page 13] .
b) Positioning a watch on the support.
ð
See Positioning the watch [
}
Page 42] .
c) Press to start the test.
ð
The bell cover closes and the test begins.
Info
If one of the test steps fails, the entire test is considered a
failure and is aborted immediately.
The bell cover opens.
d) Follow the test procedure.
ð
See Displaying test results [
}
Page 45] .
e) Wait until the bell cover is open.
ð
The bell cover opens automatically at the end of the test.
f) Read the test result.
ð
See Displaying test results [
}
Page 45] .