Witschi ProofMaster Operating Manual Download Page 67

Page: 67 / 96

Settings

17.10.2019

67 / 96

Settings

Mandatory

Programming is always done without running a test

sequence.

Info

All procedures in this section start with displaying the

Settings menu.

7.1

Quick settings menu

Opening the quick settings

The ProofMaster is switched on, see

a) Swipe the touchscreen

with your finger in the direction of the

arrow.

The quick settings appear.

b) Move the cursor left to decrease the brightness and right to

increase the brightness.

c) Move the cursor left to decrease the volume and right to increase

the volume.

d) Press

to open the Settings menu.

Closing the quick settings

a) Swipe the touchscreen

with your finger in the direction of the

arrow.

The settings window is closed.

Tip

Additional display and audio settings can be made.

See

Display and audio settings [

}

Page 71]

Summary of Contents for ProofMaster

































































































Search results

Summary of Contents for ProofMaster

Reviews:

Brands by name

Popular brands

Witschi ProofMaster, Operating Manual

Search results

Summary of Contents for ProofMaster

Reviews:

Brands by name

Popular brands