Use
44 / 96
17.10.2019
5.2.11 Identifying the tests
All measurements are identified by the measured test specimen
(model). It is possible to add further identification elements:
• Prefix (for example, part number)
• User
• Comment (4 lines with maximum 32 characters)
Enabling identification
a
1
a) Press
to open the identification window.
b) Enable the identification.
ð
The button
1
is blue when the function is enabled and grey
when it is not.
ð
The identification parameters entered are saved with the
measurement result and also printed on the label.
Entering the identification
settings
ü
The program is selected, Identification is enabled and the
Identification menu is displayed.
a
c
a) Press
Apply last entries
to fill in the input fields with the settings
from the last measurement, or press one of the input fields to open
the alphanumeric keypad.
b) If necessary, enter the desired settings.
ð
Use the alphanumeric keypad.
c) Press
OK
to confirm the entry.
d) Press
to perform the measurement.
Summary of Contents for ProofMaster
Page 1: ... ProofMaster Operating manual ...
Page 95: ...17 10 2019 95 96 Notes ...
