manualshive.com logo in svg

Witschi ProofMaster, Operating Manual

Share
Download
Witschi ProofMaster Operating Manual Download Page 86

Settings

 

 

86 / 96

17.10.2019

Selecting the results dis-
play

The measurement result can be displayed in numeric or reduced form.
See examples below.

Numeric format

Reduced format

OK

Not OK

OK

Not OK

a

a) Open the results display by tapping the displayed selection.

b

b) Select the desired display type.

ð

In the above example, Reduced.

Printing the footer

a

a) Enable or disable the printing of the footer.

ð

The button is blue when the function is enabled and grey

when it is not.

Configuring the footer

a

a) Open the footer configuration by tapping the beginning of the

displayed footer.

ð

In the following example, no text is entered in the footer.

b) Tap on the text area to open the alphanumeric keypad.

c) Enter the footer using the alphanumeric keypad.

ð

4 lines with maximum 30 characters.

ð

The entered footer is printed on the label.

Summary of Contents for ProofMaster

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands