manualshive.com logo in svg

Witschi ProofMaster, Operating Manual

Share
Download
Witschi ProofMaster Operating Manual Download Page 38

Use

 

 

38 / 96

17.10.2019

5.2.5

Programming a quick test

Test pressure

ü

The ProofMaster shows the home screen.

a

a) Press 

.

b

e

g

ð

The Quick Select screen appears.

b) Tap 

Pressure

.

ð

The selection of the test pressure values appears.

c) Press the desired test pressure or press 

Manual

.

ð

The test pressure is programmed or a number field appears

when 

Manual

 is selected.

d) For an individual test pressure, enter the desired test pressure

value between -0.7 bar and 10.0 bar and then press 

 to

confirm the entry.

ð

The individual test pressure is programmed.

e) Press 

Watch size

 to program the size of the watch.

ð

The selection of the watch sizes appears.

f) Press the value corresponding to the size of the watch.

g) If necessary, press 

Vacuum test

 to perform a vacuum test before

the pressure test.

Info

The pressure for the vacuum test is fixed.

The pressure for the vacuum test is -0.3 bar and cannot be changed.

ð

The 

Vacuum test

 button is displayed in blue.

Summary of Contents for ProofMaster

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands