Network Video Recorder User Manual
86
5.9 Configuring HDD Group for Recording
Purpose:
You can group the HDDs and save the record files and captured pictures in certain HDD group.
Step 1
Enter HDD setting interface.
Menu>HDD
Figure 5-25
HDD General
Step 2
Select Advanced on the left side menu.
Figure 5-26
Storage Mode
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed
information, please refer to Chapter 14.4 Managing HDD Group.
Step 3
Select General in the left side menu
Step 4
Click
to enter editing interface.
Step 5
Configuring HDD group.
1)
Choose a group number for the HDD group.
2)
Click Apply and then in the pop-up message box, click Yes to save your settings.
3)
Click OK to back to the upper level menu.
4)
Repeat the above steps to configure more HDD groups.
Step 6
Choose the Channels which you want to save the record files in the HDD group.
1)
Select Advanced on the left bar.
2)
Choose Group number in the dropdown list of Record on HDD Group
3)
Check the channels you want to save in this group.
4)
Click Apply to save settings.
After having configured the HDD groups, you can configure the Recording settings following the
procedure provided in Chapter 5.2-5.7.
Summary of Contents for WP-N6516-E2
Page 1: ...USER MANUAL WP N6516 E2 www wisstar net info wisstar net...
Page 128: ...Network Video Recorder User Manual 127 Figure 8 18 Copy Settings of Alarm Output...
Page 177: ...Network Video Recorder User Manual 176 Figure 12 24 View HDD Status 2...
Page 215: ...www wisstar net info wisstar net...
