Wipro Ego Series User Manual Download

Page: 48 / 103

2 - 20

Ego Series Notebook PC

2.7 Using the Video Function

Your Notebook PC provides an outstanding video subsystem, including:

ATI Mobility Radeon 9600 video controller with 64MB SDRAM, and

15-inch XGA/SXGA+/14.1-inch XGA TFT color LCD screen.

The power features of the ATI Mobility video controller include:

Powerful Video Controller

64-bit memory bus, with 64MB DDR SDRAM installed.

Integrated dual-channel LVDS interface, up to 85Hz per channel.

Integrated enhanced TV encoder with 10-bit DAC frequency.

Supports Dual independent displays (LCD/CRT, LCD/TV, TV/CRT).

Motion compensation and iDCT for MPEG2 playback acceleration.

Hardware-based DirectX 9 supported for 3D acceleration.

Remind you...

You are strongly recommended to install the video driver
included in the software CD of your computer to take full
advantage of the video subsystem.

When using the external CRT monitor as the display
output device, the resolution depends on the specification
of the connected CRT monitor.

Summary of Contents for Ego Series








































































































Search results

Summary of Contents for Ego Series

Reviews:

Related manuals for Ego Series

Brands by name

Popular brands

Wipro Ego Series, User Manual

Search results

Summary of Contents for Ego Series

Reviews:

Related manuals for Ego Series

Brands by name

Popular brands