Wipro Ego Series User Manual Download

Page: 18 / 103

1 - 8

Ego Series Notebook PC

Rear View

Kensington Lock

This port is used to lock the computer to a location for security (see

Caring

Your Notebook PC

in Chapter 7 for more information).

Ventilator

The ventilator is designed to cool the system. DO NOT block the ventilator for
air circulation.

Power Connector

To connect the AC adapter and supply power for the computer.

S-Video Connector

By using a Super VHS (S-Video) cable, this connector allows you to connect a
television (NTSC/PAL system) for a great view of the computer display.

VGA Port

The 15-pin D-sub VGA port allows you to connect an external monitor or other
standard VGA-compatible device (such as a projector) for a great view of the
computer display.

Your Notebook PC provides many I/O ports on the rear panel.

Summary of Contents for Ego Series








































































































Search results

Summary of Contents for Ego Series

Reviews:

Related manuals for Ego Series

Brands by name

Popular brands

Wipro Ego Series, User Manual

Search results

Summary of Contents for Ego Series

Reviews:

Related manuals for Ego Series

Brands by name

Popular brands