Wipro Ego Series User Manual Download

Page: 16 / 103

1 - 6

Ego Series Notebook PC

Right-side View

Cover Button

Press this button to open the top cover.

System LEDs

Wireless LAN

: glows

Green

to indicate the wireless LAN function

of the computer is enabled.
-

Power On/Off/Suspend

: glows

Green

to indicate the computer is

turned on; blinks

Green

to indicate the system is in suspend mode.

Battery Status

: glows

Green

to indicate the battery is being charged

(with AC adapter connected); glows

Orange

to indicate low battery

power (less than 5%); blinks

Orange

to indicate the battery failed.

USB Port

The USB 2.0 port allows you to connect USB-interface peripheral devices,
such as the mouse, keyboard, modem, external hard disk module, printer, and
more.

Ventilator

The ventilator is designed to cool the system. Do not block the ventilator for
air circulation.

Knowing the components on the right side of your computer.

Summary of Contents for Ego Series








































































































Search results

Summary of Contents for Ego Series

Reviews:

Related manuals for Ego Series

Brands by name

Popular brands

Wipro Ego Series, User Manual

Search results

Summary of Contents for Ego Series

Reviews:

Related manuals for Ego Series

Brands by name

Popular brands