Wipro Ego Series, User Manual

Page: 89 / 103

6 - 4
Ego Series Notebook PC
Connecting the IEEE 1394 Devices
The IEEE 1394 port of your computer is a next-generation serial bus that features
a high-speed transfer rate and the connection of up to 63 devices, allowing you
to connect many high-end peripheral devices and consumer electronic
appliances, such as the DV (digital video camera). The IEEE 1394 standard
interface supports “
plug-and-play ” technology, so that you can connect and
remove the IEEE 1394 devices without turning off the computer.
To connect the IEEE 1394 device, simply connect the cable of the device to the
IEEE 1394 port of your computer.
Connecting the Printer
If your printer has a parallel interface, you can then use the 25-pin D-sub
parallel port on the computer to connect the printer. The following instruction
describes the general procedure to connect a printer:
1. Turn off the computer.
2. Connect one end of the printer cable to the computer’s parallel port,
and the other end to the printer.
3. Connect the power cord and turn on the printer.
4. Turn on the computer, and the system will detect a new device.
Install the required driver.
For further instructions, please refer to your printer’s manual.