Winterhalter PT-L, Operating Instructions Manual

Page: 11 / 44

Rinse aid and detergent
9
5.3 Suction tube with level control
Caution

Only use the suction tube with sufficiently stable containers. Narrow and tall containers can
tip if the suction tube is pulled.

Do not place the suction tube for the rinse aid in the detergent container or vice versa.

Do not pull unnecessarily on the suction hose or main power cable, as this may lead to a
defect.
As an option, with your machine you may have one or more suction tubes. The suction tube is already con-
nected to the machine.
Figure 1:
Suction tube for detergent
Transparent suction hose
Black cap
Figure 2:
Suction tube for rinse aid
Blue suction hose
Blue cap
Figure 1 Figure 2
Servicing and maintenance

Rinse the suction tube at every container change under running water. Re-
move crystallised detergent residue.

Ensure that both vent holes (a) in the caps are open.

Put the suction tube back into the container. Slide the cap downwards until
the container opening is closed.
5.4 Changing the detergent product
Caution

Mixing different detergents can lead to efflorescence that can lead to a failure of the deter-
gent dosing device. This is applicable even if the new detergent is from the same manufac-
turer.

The dosing tubes and the detergent dosing device must be thoroughly rinsed with water
before the new detergent is used.

A new detergent product usually requires a new setting of the detergent dosing device. Assign the re-
quired work to an authorised service technician to attain good cleaning results.
If this is not done, the warranty and product liability of Winterhalter Gastronom GmbH expires.