Winterhalter PT-L, Operating Instructions Manual

Page: 32 / 44

PIN Menu
30
12.6 Changing the amount of detergent / rinse aid
When a new detergent or a new rinse aid is used, it may be necessary to change the dosing amount. Please
observe the dosing recommendations on the packing.
The dosing amount can be adjusted separately for every standard programme.
IMPORTANT In the next menu, only the dosing amount of the installed dosing devices is changed. Please
consult the corresponding device documents for external dosing devices.
Opening the menu

Press the button.
Changing the detergent dosing amount

Select a washing programme: press one of the three buttons (1).
INFO - The display of the three pictograms depends on the type of dishwasher.
- The dosing amounts for each washing programme can be set separately.

The background of the selected button (1) and the button (4) changes to white.

The current detergent dosing amount and the internal name (P003) is displayed in field (3).

Change the dosing amount with the scroll buttons (2).

Press the button (5) in order to save the entry.

The button (5) flashes briefly in white.
Changing the rinse aid dosing amount

Press the button.

The background of the button becomes white.

The remaining steps are much the same as the steps for changing the detergent dosing amount. There-
fore, proceed as in the "Changing the detergent dosing amount" section.

Press the back button to exit from the menu.
12.7 Resetting the water back-flow counter
The water back-flow counter must be reset if this symbol flashes on the screen of machines with
an external partial or full demineralisation unit.

Contact an authorised service technician to exchange the external partial or full demineralisation unit.
Resetting the water back-flow counter

Tap the following buttons in turn:

Press the back button to exit from the menu.