Malfunctions
19
9.1 Error code call
In the display, the following symbol flashes:
Tap the following buttons in turn:
The error codes are displayed in area (a).
INFO
Malfunctions already resolved are also displayed
here (e.g. ERR 1 OK).
Contact an authorised service technician for the repair.
Press the button (b) twice to leave the menu.
9.2 Poor cleaning result
Possible Cause
Remedy
The dishes do not get clean
No or low detergent dosing
Set the dosing amount as per the manu-
facturer’s specifications (
12.6)
Check the dosing lines (for kinks, break-
age, ...)
Exchange the storage container, if empty
Dishes incorrectly sorted
Do not stack dishes one over the other
Nozzles of the rotating wash
fields blocked
Remove the rotating wash fields and
clean the nozzles (
8.2)
Temperatures too low
Check temperatures (
10)
There is formation of layers on
the dishes
In case of limescale deposits:
The water is too hard
Check the water preparation
Clean thoroughly
In case of starch residues:
Temperature of the manual pre-
cleaning (brush) is higher than
30 °C
Lower the temperature of the manual
pre-cleaning
Carry out the basic cleaning programme
(
12.5.2)
The dishes do not dry on their
own
No or low rinse aid dosing
Set the dosing amount as per the manu-
facturer’s specifications (
12.6)
Check the dosing lines (for kinks, break-
age, ...)
Exchange the storage container, if empty
Rinse temperature too low
Contact an authorised service technician
for the repair
For machines without integral softener:
INFO
The water quality affects the washing and drying performance. We therefore recommend from a
total hardness of more than 3° dH (0.53 mmol/l) that the machine is supplied with softened water.
9.3 Increased generation of noise
For ClimatePlus machine models:
In rare cases a loud humming noise may develop due to sound reflection. In this case we recommend the
installation of isolating buffers.
Contact an authorised service technician for the installation.
Summary of Contents for PT-L
