Winterhalter PT-L, Operating Instructions Manual

Page: 28 / 44

PIN Menu
26
Programming automatic switch off

Tap the following buttons in turn:
The setting of days of the week or special dates is much the same as for automatic switch on. Proceed as
described in this section.
Sequence of the automatic switch off:

Sound 3 short beeps

10 second pause

Sound 3 short beeps

10 second pause

Sound 3 short beeps

The machine is emptied and switched off using the self-cleaning programme.
INFO If the hood is open at the time of the automatic switch off, the machine is pumped empty and
switched off, but
not cleaned internally.
12.3 Operating data
Here you can read out all operating data.
Retrieving the operating data

Press the button.
The following operating data is shown on the display.
Commissioning
Date
Next service in
4
x hours or washing cycles
Total operation hours x hours
Total washing cycles x
Total water consumption x litres
Full washing cycles EnergyPlus
5
x
Total energy savings
5
x kWh
Switching cycles heat pump
6
x
Op. hours heat pump
6
x hours
Absorbed energy
6
x kWh
Delivered energy
6
x kWh
Op. hours/day x hours
Washing cycles/day x
Water consumption/day x litres
Remaining capacity water treatment x litres
Operating hours Master old
7
x hours
INFO The display depends on the facilities of the machine.

Press the back button to exit from the menu.
4
An authorised service technician can activate this function.
5
only for EnergyPlus models
6
only for ClimatePlus models
7
when a new display is installed