4
3
2.0 SAFETY INSTRUCTIONS
Read all steps and guides carefully before installing and using your Water Filtration System.
Follow all steps exactly to correctly install. Reading this manual will also help you to get all the
benefits from the Water Filtration System.
Do not attempt to use this product to make safe drinking water from non-potable water
sources. Do not use the system on microbiologically unsafe water, or water of unknown
quality without adequate disinfection before or after the system.
This system is certified for cyst reduction and may be used on disinfected water that may
contain filterable cysts.
Check with your state and local public works department for plumbing and sanitation codes.
You must follow their guides as you install the system. Follow your local codes if they may
differ with guides in this manual.
The Water Filtration System works on water pressures of 20 psi (minimum) to 100 psi
(maximum).
If your house water pressure is over the maximum, install a pressure reducing valve in the
water supply pipe to the Water Filtration System.
Do not install the Water Filtration System outside, or in extreme hot or cold temperatures.
Temperature of the water supply to the Water Filtration System must be between
33 ~100 F(0.6-38 degrees C). Do not install on hot water.
3.0 SPECIFICATIONS & DIMENSIONS
Supply water Pressure :
20~100 psi (140~689kPa)
Supply water temperature limits :
33 ~100 F (0.6 ~38
℃
)
Tubing :
1/4” quick connect fittings and tubing included
(Tubing is not Performance Tested or Certified by NSF)
Capacity :
400 gal (1513 liters)
Flow rate :
0.5 GPM (1.89 liters/min)
FCSPU1
4.13 Inches
11.97 Inches
16.40 Inches
WARNING
: When using Saddle Valves, check with local ordinances.
<Figure 3.0.1>
