15
16
4.13 Attaching the Diverter Valve
You are now ready to turn the water main back on. As the system fills, check for leaks and
make sure that everything is connected properly.
Run the water to flush the system for about 2 minutes. You may notice some carbon dust in the
water initially. This is normal and harmless. After flushing the system you should be able to
check for clarity of the water in a clear glass
Your Fincel drinking water system from Winix is now ready for use;providing you and your
family with clean, healthy and great tasting drinking water.
1. Unscrew to remove the aerator(wire screen) and washer from the end of faucet.
2. Position the Diverter Valve onto the faucet and hand tighten the textured collar
counterclockwise until secure.
Attaching the Tubing to the Diverter
1. Unscrew to remove the textured nuts.
2. With the threads facing out, push the nuts onto the tubes.
3. Firmly push the tubes onto the barbs.
4. Screw the nuts onto the barbs and hand tighten.
5. Use the Tie Straps to secure the tubing to the faucet.
NOTE
Do not run hot water through system damage to filters will occur.
Inlet
Outlet
Inlet
Outlet
Tie Strap
<Figure 4.13.1>
<Figure 4.13.3-5>
<Figure 4.13.6>
<Figure 4.13.2>
Option 3
