Marine Installation Manual
2021-08
3-2
3 Engine Installation
3.1 Engine dimensions and masses
X72DF
Project-specific dimensions and masses for the main components are to be re
-
quested from the engine builder.
3.1.1
Dismantling heights for piston and cylinder liner
Dimensions F1, F2, F3 in
and the corresponding table are for
guidance only and may vary depending on crane dimension, handling tools and
dismantling tolerances.
However, please contact WinGD or any of their representatives if these values
cannot be maintained or if more detailed information is required.
For details see also drawings
‘Dismantling Dimensions’
(DG 0812) provided on
the WinGD webpage under the following links:
5-cyl. engine
6-cyl. engine
7-cyl. engine
8-cyl. engine
3.1.2
Crane requirements
•
An overhead travelling crane is to be provided for normal engine mainte
-
•
The crane is to conform to the requirements of the classification society
NOTE
The dimensions and masses provided in the above table are not
binding. For prevailing data refer to the relevant drawings, which are
updated on a regular basis.
NOTE
As a general guidance for crane speeds, WinGD recommends at least
a two-speed hoist, which allows selecting either a high speed of
6.0
-
8.0m/minute or a low speed of 0.6-0.8m/minute.
