Marine Installation Manual
2021-08
2
List of Changes
X72DF
6.4.1 Reduction of torsional vibration
Spring damper
Spring damper oil flow specification updated
7.1.2 Selective catalytic reduction
Urea specification added
Note added: An SCR system can only be used when operating in diesel mode
9.1 Classification societies
Table 9-1 updated
9.2 List of acronyms
Table 9-2 updated
Revision:
06
Date of issue:
2021-08
Location of change
Subject
Revision:
05
Date of issue:
2020-07
Location of change
Subject
Preface
Marine Installation Drawing Set
Remark added to DG 9730
1.8 Changeover between operating modes
Section rewritten
2.2.5 Power range limits
Name of Line 5 has changed and section updated
4.3.2 Main lubricating oil system
Main lubricating oil system components
Full-flow filter specification: mesh size corrected
4.10 Exhaust gas system
New paragraph for explosion relief devices
Revision:
04
Date of issue:
2020-01
Location of change
Subject
1 Engine Description
WinGD Engine Control System
Engine Control System ‘UNIC’: trade name changed to function name
1.3 Components and sizes of the engine
Design features
This section removed; table 1-1 added on page 1-1 instead
1.4 Fuel operating modes
Figure 1-3 changed; remark referring to Figure 1-3 added
1.9 The Flex system
Figure 1-9, Engine Control System ‘UNIC’: trade name changed to function name
2.2.4 Power range
Light running margin (LR)
Section rewritten
2.2.5 Power range limits
Section rewritten and updated
2.2.6 Power range limits with ME driven generator for FPP
Section title changed; section rewritten and updated
2.2.7 Prohibited operation area
Section title changed; section rewritten and updated
2.2.8 CPP requirements for Propulsion Control System
New section added with updated content from former section 2.2.7
2.5 Electrical power requirement
Table 2-4, Engine Control System ‘UNIC’: trade name changed to function name
3.1 Dimensions and masses
Table 3-1: bridge crane capacity updated; double-jib crane capacity added
3.5.1 Assembly of subassemblies
Note added
3.9.2 Earthing device
Position of earthing device on shaft
Note added
4.2.1 Low-temperature circuit
Term ‘temperature controller’ replaced with ‘automatic temperature control valve’
4.2.2 High-temperature circuit
Whole section updated