Marine Installation Manual
2021-08
4
List of Changes
X72DF
Revision:
03
Date of issue:
2019-05
Location of change
Subject
Preface
Introduction
WinGD MDO/MGO definition clarified; fuel specification updated to ISO 8217:2017
1.2 Primary engine data
Table 1-1: BSEC data for R1, R3, R4 updated
1.4 Fuel operating modes
Section rewritten
1.5.3 Methane number calculation
Link to EUROMOT webpage updated
1.6 Operation in diesel mode
1st paragraph rewritten
2nd paragraph: term ‘MDO’ changed to ‘MDO/MGO’
2.2.6 Power range limits with main-engine driven generator
Table 2-3: coefficient ‘C0’ for range 0.96-1.00 corrected
2.2.7 Power range limits with controllable pitch propeller
Description of equation corrected
Examples 1+3, 1st paragraph: minimum CMCR percentage value corrected
3.1 Dimensions and masses
New paragraph replaces former table 3-2
4.2.2 High-temperature circuit
High-temperature circuit components
Description of buffer unit revised
4.4.1 Fuel oil system components
Mixing unit
Term ‘MDO’ changed to ‘MDO/MGO’
4.5 Pilot fuel oil system
Functionality
Sulphur content
WinGD MDO/MGO definition clarified
New paragraph added
4.6.3 Gas specifications
Table 4-11: information about gas temperature at GVU inlet updated
4.10.2 Air intake
Operating temperatures clarified
4.12 PTO, PTI, PTH and primary generator applications
Whole section updated
5.4 Propulsion Control Systems
Table 5-1 updated
5.4.2 Recommended manoeuvring characteristics
2nd paragraph reworded for clarification
5.6.2 Signal processing
Section rewritten and link to external document changed
6.1.2 Balancing second order moments
Table ‘Suppliers of electrically driven compensators’ removed
6.2 Lateral vibration (rocking)
Reduction of lateral vibration by means of hydraulic stays
Section rewritten
6.7 Countermeasures for dynamic effects
Tables 6-1, 6-2, 6-3 added
7.1.2 Selective catalytic reduction
High-pressure SCR
New section
7.2 Engine noise
Introduction updated
9.2 List of acronyms
Updated
Revision:
02a
Date of issue:
2018-11
CORRECTION
Location of change
Subject
1.5.1 Torque/power meter requirement
Paragraph and table 1-4 corrected