WinGD RT-flex50DF, Maintenance Manual, Page: 443 / 586

Maintenance
6606 − 1/A1
Winterthur Gas & Diesel Ltd.
5/ 7
3. Installation
1) Clean the sealing surfaces of the SAC,
the scavenge air receiver and the
frame.
2) Attach the four swivel lugs
(94048 − M16, Fig. 4 ) and the two
chains (94666I) to the SAC.
3) Attach the manual ratchet (H2, Fig. 6 )
to the chain (94666I).
4) Attach the support (94661) to the
scavenge air receiver.
5) Attach the manual ratchet (H3) to the
shackle on the support (94661).
6) Attach the manual ratchet (H3) to the
support (94661).
7) Attach the engine room crane to the
two chains (94666I).
8) Operate the engine room crane to lift
the SAC into the vertical position.
9) Operate the engine room crane and the
manual ratchet (H2) to get the SAC into
the vertical position shown.
10) Operate the manual ratchet (H2) and
the engine room crane to get the SAC
into the horizontal position shown.
11) Attach the manual ratchet (H3) to the
rear chain (94666I).
12) Attach the two supports (94663A and
94663B, Fig. 7 ) to the left and the right
side of the receiver.
13) Attach the two lugs (94663C) and the
two safety chains (94663D) as shown.
14) Apply a high-temperature and
non-hardening jointing compound to
the sealing surfaces.
Note: During step 15 ), keep the SAC
horizontal.
15) Operate carefully the manual ratchet
(H3) to pull the SAC into the receiver
until the rear of the SAC is directly
below the manual ratchet (H2).
16) When the rear of the SAC is on the
supports (94663A, 94663B), remove
the manual ratchet (H2).
Scavenge Air Cooler: Removal and Installation
2016
Fig. 6
WCH00708
H2
Engine Room
Crane
94666
H3
Fig. 7
H2
94663A
94663B
94661
H3
Engine Room
Crane
94666I
94048 − M16
94663D