WinGD RT-flex50DF, Maintenance Manual, Page: 362 / 586

Maintenance
5552 − 2/A1
Winterthur Gas & Diesel Ltd.
4/ 8
3. Bearing Shells −
Removal
1) Put the template (94567, Fig. 5 ) on the
top bearing shell.
2) Put the wooden underlay (1) in position
below the camshaft (2) as shown.
3) Use the wooden underlay (1) as a lever
to move the camshaft (2) up a small
distance.
4) Move the template (94567) and the top
bearing shell down.
5) Remove the template (94567).
6) Put a mark on the top bearing shell to
identify its position.
7) Remove the related bearing shell.
4. Camshaft − Removal
1) On the supports (94566 and 94566A,
Fig. 6 , remove the screws (3).
2) Remove covers (2, 4) from the
supports (94566, 94566A).
3) Loosen the screws (1, 5).
2016
Supply Unit: Removal and Fitting of Camshaft and Bearing Shells
I
I
94567
94567
I - I
2
Fig. 5
1
012.983/05
94567
Fig. 6
1
2
94566A
94566
5
3
3
4