WinGD RT-flex50DF, Maintenance Manual, Page: 395 / 586

Maintenance
5556 − 1/A1
Winterthur Gas & Diesel Ltd.
13/ 13
6. Completion
1) Install the applicable HP fuel pipe(s), refer to 8752 − 1 .
2) Install the fuel inlet and outlet pipes.
3) Make sure that the valves to the fuel pumps are open.
4) Set to on the power supply to the actuators.
5) Open the fuel inlet valve, refer to the Operation Manual, Control Diagram 4003
− 2
and the Pipe Diagram 4003 − 11.
6) Make sure that the fuel return valve is closed, refer to the Operation Manual,
Control Diagram 4003 − 2 and Pipe Diagram 4003 − 11.
7) Set to on the main oil supply.
8) Set to on the fuel supply.
9) Operate the turning gear to move the cam. Make sure that there are no leaks or an
unusual temperature increase.
7. Storage
1) Make sure that the storage area is clean and dry.
2) Put the fuel pump in a vertical position.
3) Apply clean oil to the fuel pump.
4) Put Vaseline
t in the open inlet and outlet holes of the fuel pump.
5) Put plastic stoppers into the open spaces.
6) Put a cover (material or plastic) on the fuel pump for protection.
7) Keep the pump in a vertical position.
Fuel Pump: Removal, Disassemble, Assemble, Installation
2016