30
5.
Information level
Top, centre, bottom buffer temperatures
The buffer temperatures are shown only in combination with a buffer tank and the MES
PLUS
WVF+ module with sensors
connected the for top, centre and bottom respectively.
Charge status
The charge status shows the usable energy of the buffer in percentage steps.
The charge status is calculated continuously based on the buffer temperatures (top, centre, bottom) and the highest
heating circuit or hot water set point.
Combustion chamber temperature
The current temperature in the boiler's combustion chamber is displayed.
Flue gas temperature
The current flue gas temperature is displayed.
Note!
The flue gas temperature is measured directly on the flue outlet. It may therefore deviate from a standard
measurement.
Operating hours
The total number of boiler operation hours is displayed.
Number of starts
The number of starts is displayed.
Software version
The current software version of the firing automates (main PCB) is displayed.
Boiler model
The boiler model of the LogWIN is displayed.
Summary of Contents for INFOWIN TOUCH
Page 43: ......
