25
3.
Operation modes
3.2 ON mode, self-test, display OFF
Turning the boiler on
Touch the InfoWIN Touch, the press the turn on button (Fig. 52) and confirm "Boiler On" – Fig. 53. The system is iden-
tified during the power-up procedure. The self-test starts automatically and the load screen is displayed – Fig. 54.
Self-test
Some sensors, switches and motors are checked during the self-test.
After a successful self-test, the homescreen (Fig. 55) is displayed. If an error is found during the self-test, a message
1
is displayed (see Section 7).
Display OFF
If the InfoWIN Touch is not touched for more than 12 min., the display goes dark and only the LED is lit up green. The
display turns back on again when the InfoWIN Touch is touched.
Fig. 52 Turning the boiler on
Fig. 53 Confirming Boiler On
Fig. 54 Load screen
Fig. 55 Homescreen
LogWIN
Boiler is turned off
Turn on
Boiler On
Turn on
Cancel
LogWIN
20 °C
Stand-by
Information level
Summary of Contents for INFOWIN TOUCH
Page 43: ......
