Windhager INFOWIN TOUCH, Operating Manual

Page: 20 / 44

20
2. InfoWIN Touch display and operating unit
2.9.6 Homescreen
The homescreen can be displayed as fullscreen or
splitscreen (e.g. boiler and buffer load function module
simultaneously).
Factory setting:
Fullscreen
Selection: Fullscreen
Splitscreen with buffer
Fig. 34
Configure homescreen
Splitscreen with buffer Fullscreen
2.9.7 Boiler
Setting determining which boiler the InfoWIN Touch con-
trols, e.g. wood chips, wood or pellet boiler, etc.
Factory setting: No, the setting must be selected when the
boiler is turned on for the first time.
Selection:
Pellets:
BioWIN 2
Wood: LogWIN
Combi boiler: DuoWIN
Wood chips: PuroWIN
Heating oil: No function
No:
No boiler, e.g. for MultiWIN PLUS , simply mas-
ter operation for remote switching or web
server
MB1: Master control 1 (without boiler)
MB2: Master control 2 (without boiler)
Fig. 35
Choose boiler
Pellets Wood Combi boiler Wood chips
Heating oil No MB 1 MB 2
2.9.8 Function titles
With function titles, the designations (e.g. LogWIN) of the
boiler or the function module (e.g. heating circuit 1) can
be changed.
Fig. 36
Function titles
By changing a restart is required.
Boiler LogWIN
Buffer tank 3000 l
Heating circuit
HEATING CIR-
CUIT 1
Heating circuit
HEATING CIR-
CUIT 2
Note!
After changing a function title, the system
must be read again – see Section 2.9.12.