31
3.
Care, Cleaning, and Maintenance
3.4.4 Cleaning top coasting surfaces and blower wheel
– Using the ON/OFF button on the InfoWIN
PLUS
, turn off the boiler (Fig. 64) and wait until the display has gone
out (ca. 20 min).
Warning of hot surface: risk of burns!
Before touching the screw connections and coasting surface cover, turn off the boiler and let it
cool.
– Open the cladding door (Fig. 65) – refer also to section 2.2.
– Pull the cover on the pellet boiler side towards you and lift it off – Fig. 66.
– Remove insulation from the coasting surfaces cover – Fig. 67.
– Unscrew and remove the screws on the cover – Fig. 68, 65.9
Fig. 64 Turning off boiler
Fig. 65 Opening the cladding door
Fig. 66 Pull the cover on the pellet boiler
side forwards and remove it
Fig. 67 Remove insulation
Fig. 68 Loosen the screws
Fig. 69 Lift off the cover
