29
3.
Care, Cleaning, and Maintenance
3.4.3.1 Cleaning the thermocontrol sensor and down chute
– If necessary, remove fly ash from the thermocontrol sensor. The thermocontrol sensor is located in the com-
bustion chamber – Fig. 51.
– If necessary, use screwdriver to clean inside of down chute – Fig. 52.
– Remove combustion residue from the combustion chamber with a vacuum cleaner – Fig. 53.
Fig. 51 Cleaning the thermocontrol sensor
Fig. 52 Cleaning the down chute
Fig. 53 Remove residue from combustion
from the combustion chamber
3.4.3.2 Burner pot cleaning
– Lift the bottom and top part of the cone out of the burner pot – Fig. 54, 55.
– Remove all traces of sediment accumulation from the cones with a brush or scrape off with the spatula –
Fig. 56, 57.
Fig. 54 Lift out top part of cone
Fig. 55 Lift out bottom part of cone
Fig. 56 Clean cone
Fig. 57 Clean cone
