20
2.
Operation
2.5 Operating modes
2.5.1 OFF mode
The boiler is turned off when in OFF mode. At this point
in time, the display and all buttons, with the exception
of the ON/OFF button, will not function. The LED on the
InfoWIN
PLUS
will not light up – Fig. 7.
Fig. 7
OFF mode
Fig. 8
Self-test
Self-test
active
Fig. 9
Standard display
Boiler temperature
(Operating phases)
Info
Menu
107
°F
Fig. 10 Display lighting ON
Boiler temperature
(Operating phases)
Lighting ON
107
°F
(Animated symbol)
2.5.2 ON mode, lighting ON, self-test,
lighting OFF
Press the ON/OFF button - lighting and display will be tur-
ned on and the self-test will start automatically – Fig. 8.
Self-test:
Sensors, switches, and motors are checked during the
self-test.
After a successful self-test, the display will show an
operating phase and the boiler water temperature (standard
display). The LED signal lamp will turn green, and the desired
functions can be selected using the buttons – Fig. 9.
If the self-test was unsuccessful, an information message
(e.g., information, fault, alarm) will be displayed (see sec-
tion 4).
Lighting ON/OFF
The display lighting turns off automatically after 10 min.
(Fig. 10). Pressing one of the six buttons turns the lighting
on again for 10 minutes.
InfoWIN
PLUS
identifies and stores the various operating mo-
des and conditions. Once the system is turned on, other
operating modes may also be displayed in addition to the
standard display, such as manual operation, and solid fuel
or accumulator tank operation. Malfunctions are also dis-
played. These operating modes and conditions are descri-
bed later in this manual.
La belident GmbH Ar t.-N o. : W 08-0 5
DANGER
The ON/OFF Button does not turn OFF the power!
The boiler/heater and all ac-
cessories are still energized! To turn OFF the power (e.g., for repairs), disconnect
the main power via the circuit breaker.
