Wincor Nixdorf TH210-3, User Manual

Page: 9 / 36

TH210-3 for MF
_____________________________________________________________________
_________________________________________________________
2
General Safety Information
Before installing and using the printer, please read the following items
carefully.
Safety instructions
Do not touch the cutter and tear bar of the printer.
The print head is a thermal element and it is at high temperature during
printing or just after operation, therefore please do not touch it and its
peripherals for safety reasons.
The thermal head is an ESD-sensitive device. To prevent damage, do
not touch either its printing part or connecting parts.
Caution:

Install the printer on a flat and stable place.

Reserve adequate space around the printer so that convenient
operation and maintenance can be performed.

Keep the printer away from water source.

Do not use or store the printer in a place exposed to heat of
fire, moisture, serious pollution and direct sunlight.

Do not place the printer on a place exposed to vibration or
impact.

No dew condensation is allowed to the printer. In case of such
condensation, do not turn on the power until it has completely
gone away.

Connect the DC adapter to an appropriate grounding outlet.
Avoid sharing a single electrical with large power motors and
other devices that may cause the fluctuation in voltage.

Disconnect the DC adapter when the printer is not used for a
long time.

Don’t spill water or other materials on the printer. If this
happens, turn off the power immediately.