Wincor Nixdorf TH210-3, User Manual

Page: 34 / 36

TH210-3 for MF
_____________________________________________________________________
_________________________________________________________
27
Code (Hexadecimal) Command
1B 4A n Print and Feed Paper
1B 4B n1 n2 d1...dn Select Single-Density Graphics
1B 4C Select Page Mode
1B 52 n Select International Character Set
1B 53 Select Standard Mode
1B 54 n Select Print Direction in Page Mode
1B 56 n Select or Cancel 90 Degree Clockwise
Rotated Print
1B 57 n1, n2...n8 Set Print Area in Page Mode
1B 59 n1 n2 d1...dn Select Double-Density Graphics
1B 5C n1 n2 Set Relative Print Position
1B 61 n Select Justification
1B 63 33 n Select Paper Sensors to Output Paper
End Signals
1B 63 34 n Select Sensors to Stop Printing
1B 63 35 n Enable or Disable Panel Button
1B 64 n Print and Feed n Lines
1B 69 Perform Full Knife Cut
1B 6A k Read from Non-Volatile Memory
1B 6D Perform Partial Knife Cut
1B 70 n p1 p2 Generate Pulse to Open Cash Drawer
1B 73 n1 n2 k Write to Non-Volatile Memory (NVRAM)
1B 74 n Select Character Code Table
1B 75 n Request Alternate Status
1B 75 0 Transmit Peripheral Device Status
1B 76 Transmit Paper Sensor Status
1B 7B n Select or Cancel Upside Down Print Mode
1D 00 Return Boot Sector Firmware Part Number