Wincor Nixdorf CMD-V5, Service Manual

Page: 115 / 222

Description of the components Stacker
01750214538 A Cash Media Dispenser Version 5 - Service Manual 2-
77
A bundle output from the stacking position of the clamp is controller by the
routing disk. The clamp is closed with the help of the routing disk.
The clamp transports the bundle, guided in gear tracks, to the respective
position. The drive motor for the drive system is mounted on the clamp.
The routing disk determines the path of the clamp. It aligns itself in accordance
with the requirements. If the clamp reaches the customer cash-out position,
the bundle is transported somewhat out of the clamp. This takes place with the
help of the installed belts which are controlled by a separate drive motor on the
clamp.
A bundle of notes can be transported from the customer cash-out position and
into the retract box of the reject/retract cassette by the retract function. The
stacker can transport bundles from the stacking position to the customer cash-
out position or into the reject/retract cassette or from the customer cash-out
position back into the retract box of the reject/retract cassette, where they are
stored unsorted. The number of storage events is counted (presuming there is
a corresponding output transport).
Optionally, a bundle can be retracted and stored in the stacking position of the
clamp. If this option is used, however, no further device operations are
possible until the bundle is removed by an operator and the software has
canceled the lock.
The drive system of the transport belts in the stacker (except for the clamp) is
provided by the main motor that also drives the dispensing units.
The reject/retract can be simply be pushed into the stacker. It engages in
place and is locked in the final position. The cassette position is checked by a
switch. To remove the cassette, it must be released with a lever on the
stacker.
The main motor can be swung away for the purpose of accessibility to the
single reject compartment.